Thermomix Mixing Bowl Stand TM5 / TM6 / TM7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to prevent your mixing bowl from tilting when the mixing knife is removed for cleaning, works with TM5 / TM6 / TM7
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The mixing bowls of TM5, TM6 and TM7 are very similar, yet all share one common and really annoying problem…
…as soon as you remove the cutting knife, the bowl will tilt, which is really annoying when you put the bowl in the sink for cleaning and the damn thing is just falling around all over the place.
Not sure why I haven't made that model earlier, as this was already bothering me when we had the TM6, and now with the TM7 it was about time.
Printed in Prusament Galaxy Black PETG
0,2 Balanced
3 perimeters
6 bottom / top layers
15% Gyroid infill
Or just import the 3mf file as project and everything is ready to go, only adjust your printer and filament.