Diamond Icicle Christmas Ornaments 2025
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fast, fun, and elegant print for the tree
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 553
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
These print beautifully in either opaque or translucent filaments.
I recommend using the Classic perimeter generator, not Arachne (the default in modern slicers).
Yes, these need supports. Use paint-on supports. Add a row of supports about every 25mm (see the screenshot from my slicer). If the icicle moves sideways within the supports as it prints, cancel the print and adjust the print settings. You might reduce both the top/bottom gap and XY gap between the supports and the model or just add more supports.
I used a single perimeter everywhere but the very top, which was just for added strength. They require some infill, but not much. If you put infill everywhere, use lightning infill to reduce weight.
I've provided my STLs, PrusaSlicer project files and GCODE for a Prusa MK3S+ printer.