1 / 3
Diamond Icicle Christmas Ornaments 2025 — image 1
1 / 3

Diamond Icicle Christmas Ornaments 2025

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€3.00 – €3.66 net (excluding VAT)

For file: diamond icicle 1 v5_0.15mm_PLA_MK3S_4h31m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.33 excluding VAT (range midpoint).

Weight reported by the author
17 g
Print time reported by the author
4.51 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

A fast, fun, and elegant print for the tree

Rating
5 / 5
Likes
38
Downloads
115
Makes
2
Views
553
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

These print beautifully in either opaque or translucent filaments. 

I recommend using the Classic perimeter generator, not Arachne (the default in modern slicers).

Yes, these need supports. Use paint-on supports. Add a row of supports about every 25mm (see the screenshot from my slicer). If the icicle moves sideways within the supports as it prints, cancel the print and adjust the print settings. You might reduce both the top/bottom gap and XY gap between the supports and the model or just add more supports.

I used a single perimeter everywhere but the very top, which was just for added strength. They require some infill, but not much. If you put infill everywhere, use lightning infill to reduce weight.

I've provided my STLs, PrusaSlicer project files and GCODE for a Prusa MK3S+ printer.

Tags