Curtain Rail Hooks for Fairy Lights / String Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple curtain rail hook for hanging fairy lights or cables without drilling. Clip on, no tools needed.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
I designed these small hooks to hang fairy lights and other lightweight decorations from a curtain rail without drilling holes in the wall or ceiling. The hook clips onto the edge of the rail/cover and hangs just in front of the curtains, so the fabric can still move freely.
You can place as many hooks as you need along the rail to route the cable, create curves, or support heavier sections of the garland. They are easy to remove and reposition, and the bright color makes them easy to find when you take everything down after the holidays.
Printing recommendations
Orientation: print flat on the side, hook opening facing up
Layer height: ~0.2 mm
Infill: 20–30%
Perimeters: 3 walls
Material: PLA or PETG (PETG recommended if you expect more load or heat)
Supports: not needed
Notes
Designed for indoor use and for light loads like LED string lights or thin cables.
If your curtain rail is different, you can easily scale the model slightly in X/Y to get a tighter or looser fit.