Replacement parts for Zefal bicycle mirror
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement parts, loosely modelled after a Zefal bicycle mirror. The mirror is to be attached to the 12mm ball end.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 64
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement parts for a bicycle mirror, loosely modelled after a Zefal model. The actual backside of the mirror is not included but the original should have a 12mm ball socket for attachment.
The parts include a proposed orientation and some auto-generated paint-on supports for printing. The shaft also includes a modifier that increases the perimeter count for the area that extends to the z-direction. You might want to use them, at least as a starting point, for print configuration.
The sample parts were printed with Prusa XL using PETG except for the shaft which was PA6-CF for increased rigidity. The nozzle used was 0.4mm
The correct dimensions are somewhat tricky as the ball end needs to be of a correct size to fit the mirror socket and be tight enough for reliable adjustment of the orientation of the mirror. The sample was printed with PA and you might want to slightly scale the model up for other less shrinking materials.
You need two 3mm screws and one 4mm screw for assembly. For the 3mm hinge, no nut is needed.