1 / 3
Replacement parts for Zefal bicycle mirror — image 1
1 / 3

Replacement parts for Zefal bicycle mirror

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement parts, loosely modelled after a Zefal bicycle mirror. The mirror is to be attached to the 12mm ball end.

Rating
0 / 5
Likes
3
Downloads
10
Makes
1
Views
64
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Replacement parts for a bicycle mirror, loosely modelled after a Zefal model. The actual backside of the mirror is not included but the original should have a 12mm ball socket for attachment.

The parts include a proposed orientation and some auto-generated paint-on supports for printing. The shaft also includes a modifier that increases the perimeter count for the area that extends to the z-direction. You might want to use them, at least as a starting point, for print configuration.

The sample parts were printed with Prusa XL  using PETG except for the shaft which was PA6-CF for increased rigidity. The nozzle used was 0.4mm

The correct dimensions are somewhat tricky as the ball end needs to be of a correct size to fit the mirror socket and be tight enough for reliable adjustment of the orientation of the mirror. The sample was printed with PA and you might want to slightly scale the model up for other less shrinking materials.

You need two 3mm screws and one 4mm screw for assembly. For the 3mm hinge, no nut is needed.

Tags