Holder for SuperNova M99
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for a SuperNova M99 adapted to Tern HSD handle bar. Will probably fit all handlebars of same type (Tern GSD etc).
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Handlebar holder for SuperNova M99 lamp, nice addition to my Tern HSD compared to the stock headlight. Addition also included a Supernova brakelight, both bought as a bundle from SuperNova (Germany).
Model recreated from similar model, but adapted to the Andros handlebar which the Tern cargobikes (HSD/GSD and probably others) use.
Printed with PETG, some flex is needed to push the holders onto the handlebar.
In addition to the prints you need some screws/locknuts and washers:
- 1 pc M6 x 50 (ideally 55 mm, 50 mm somewhat short) and a locknut
- 2 pc M4 x 25 with washers and locknuts
Printed on my Voron 0