Ender 3 V3 KE Bluetooth shutter holder (Fatburner)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For people with an Ender 3 V3 KE who use a Fatburner cooler, I developed this Bluetooth shutter holder for timelapses
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
For people with an Ender 3 V3 KE who use a Fatburner cooler, I developed this bluetooth shutter holder.
The holder is mounted on the left side of the x-axis with the original screw and fits a standard Bluetooth shutter. Alongside this I used a small TPU cilinder of 4 mm glued to the left side of the printhead, to trigger the bluetooth shutter during the timelapse.
I made this model for people who use a fatburner cooler, because the original model would not work/fit, but it can be used on the standard cooler with a longer cilinder.
Clinder suggested in TPU with 5% infill, but will work with PLA.
Timelapse GCODE (Put this at layer change instead of timelapse)
G0 Y110; Y-axis positioned at 110mm
G0 X-12; X-axis positioned at -12mm (Double check/change this value yourself!)
G4 P150; Wait 150 ms
G0 X-9; X-axis positioned at -9 mm (Double check/change this value yourself!)
G4 P850; Wait 850 ms
(This is basic GCODE specific to Ender 3V3 KE, change according to your needs!)