Ender 3 V3 KE Bluetooth shutter holder (Fatburner)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For people with an Ender 3 V3 KE who use a Fatburner cooler, I developed this Bluetooth shutter holder for timelapses
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
For people with an Ender 3 V3 KE who use a Fatburner cooler, I developed this bluetooth shutter holder.
The holder is mounted on the left side of the x-axis with the original screw and fits a standard Bluetooth shutter. Alongside this I used a small TPU cilinder of 4 mm glued to the left side of the printhead, to trigger the bluetooth shutter during the timelapse.
I made this model for people who use a fatburner cooler, because the original model would not work/fit, but it can be used on the standard cooler with a longer cilinder.
Clinder suggested in TPU with 5% infill, but will work with PLA.
Timelapse GCODE (Put this at layer change instead of timelapse)
G0 Y110; Y-axis positioned at 110mm
G0 X-12; X-axis positioned at -12mm (Double check/change this value yourself!)
G4 P150; Wait 150 ms
G0 X-9; X-axis positioned at -9 mm (Double check/change this value yourself!)
G4 P850; Wait 850 ms
(This is basic GCODE specific to Ender 3V3 KE, change according to your needs!)