Gear to be used on electric train, optimized for MK4S, sharp teeth, strong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ASA used for this, axle will get hot using ligher, flame gun. Works perfect and fits as well.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 105
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I tried to use https://www.printables.com/model/537121-replacement-gear-for-playtive-electric-trains but this did not work for my application, printing also did not print teeth sharp enough on my MK4S with ASA.
So this is new wheel made from scratch and it fits very nicely. I've decided to use different method to fix it in place as well. Just use something to heat the axle, using pliers is probably good idea and push the gear in place, try to do it in one go, as additional heating and repositioning might cause gear to bend.
Warning, axle will get really hot, be careful.