Cover for AnkerMake M5 Dual 4020 sidemount part cooler ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple cover to give the modified toolhead a more original look.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Although this part isn’t strictly necessary, I wanted a cover to make my modified toolhead look more like the original. After being unable to find one already made I decided to open up Fusion and have a go myself. Since I was quite happy with how it turned out, I decided to share it for anyone else who might find it useful.
Prints well without supports, orient it upside down so that the flat top is on the buildplate. I printed mine with 3 walls to give a little extra rigidity but I think that the model is fairly forgiving.
No need for additional hardware, just uses two of the screws which held on the original.
