Front Cateye Bike Light Mount for 22mm Handlebars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bike handlebar mount for the Cateye bike lights
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A Cateye light mount for a 22.2mm handlebar diameter.
The design comes in two variations depending on what screws you have laying around:
#4x1/2-inch wood screw
PC case fan screw (5mm major diameter, 10 mm length)
Print conditions:
PETG (PLA is too stiff to expand over the handlebar)
Print on it's side
0.15 STRUCTURAL profile with the variable layer height setting of: “0.25 adaptive quality/speed” (see screenshot)
Small amount of supports on lower hanging portion of groove (see photo and/or 3mf for more details)
A brim is recommended too
Pro-tip: If you want the mount to stay put once you clamp it, lay down a strip of electrical tape (vinyl tape) on your handlebars and then clamp this model on top.
I will consider modifying this design to fit other handlebar diameters if requested.