1 / 1
Sendero SE Snow Track Anti Rotation Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Prevents the tracks from flipping
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
New front mounts and rear hub retainers. Download the rear adapter from the Gatekeeper files listed below. I printed mine in PETG with a .6mm nozzle, so any nozzle size should work.
Instructions:
FRONT: Remove the fake brake caliper and install the Sendero Front Adapters on the front tracks
REAR: Remove the fake brake calipers. After removing the rear hex, install the rear axle hub retainer using the original screws. Install the Gatekeeper Rear Adapters from the files linked below on the rear tracks.