1 / 1
Meanwell LRS-350-24 Passive Cooling Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vented cover for passive cooling of the Meanwell LRS-350-24 PSU
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
In the process of upgrading my Ender 3v2 to an Enderwire I had to remove the old, large fan shroud with a 25mm deep fan because it wouldn't fit under the Enderwire. I have no 12mm fans laying about suited for the job, but realised I likely wouldn't need them since the electronics enclosure of my Enderwire has plenty of thru airflow anyway.
There are no well ventilated passive cooling covers for this PSU on Printables, so I whipped one up.
Print Settings
Print out of PETG or above, ASA/ABS recommended.
Files & BOM
- 4 * M3 x 4.5D x 3L Heatset Inserts
- 4 * M3 x 6 SSBH