Bracket for Aqara G100 surveillance camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This camera needs to be fixed in the upright position. To allow that on a window glass, this bracket is needed.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a bracket for the Aqara G100 surveillance camera which can be attached to any window by a double-sided adhesive tape.
This specific camera model does not allow for image inversion in its settings, so it needs to be fixed in the upright position. That's why I had to create this small platform.
Print was done using Creality Hyper PLA (any PLA would do) with standard settings, construction is sturdy, fitting is tight and guarantees that the camera does not move or fall.
After printing, you need to apply the double-sided adhesive tape to it and glue it to the window glass in its desired position.