Variabe Varia VS3 (bottomless) Portafilter Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Variable Hoder for superkop portafilter at the Varia VS3 Grinder.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 341
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
Here I have the variable Holder for more portafilters on the Varia VS3 Grinder.
I always recommend the VS3 with the bean propeller to have them not sticking to the walls :D
https://www.printables.com/model/580741-varia-vs3-coffee-grinder-bean-distributor
Addons like the plate or funnel are still in the main design of this remix.
Height adjustable
You can adjust the height of the portafilter/ holder. Even after putting the tensioner in place.
Maybe this way even a portafilter with duo outlet fits?
Tensioner
Here you can slide in the tensioner (from the bottom back of the VS3). If it is too tight you can use sth. like a wooden stick to push it in.
Variable part:
This design is so you can change the opening of the brackets. I added the .step file so you can easily edit it yourself or just ask for the sizes you need.
In the main design it comes with bracket openings of 5,9 & 6,4 mm. You can also print them from TPU.
Secure the brackets with some 1,75 mm Filament or glue.
You can also heat the brackets up a little and press the portafilter in place to get a perfect fit xD
This Design is based on a 81 mm Diameter of the Portafilter “wings”. If you need it bigger or if smaller ones doesn't fit nicely you can also contact me.
Have fun!