Variabe Varia VS3 (bottomless) Portafilter Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Variable Hoder for superkop portafilter at the Varia VS3 Grinder.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 60
- Makes
- 0
- Views
- 344
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Heyho
Here I have the variable Holder for more portafilters on the Varia VS3 Grinder.
I always recommend the VS3 with the bean propeller to have them not sticking to the walls :D
https://www.printables.com/model/580741-varia-vs3-coffee-grinder-bean-distributor
Addons like the plate or funnel are still in the main design of this remix.
Height adjustable
You can adjust the height of the portafilter/ holder. Even after putting the tensioner in place.
Maybe this way even a portafilter with duo outlet fits?
Tensioner
Here you can slide in the tensioner (from the bottom back of the VS3). If it is too tight you can use sth. like a wooden stick to push it in.
Variable part:
This design is so you can change the opening of the brackets. I added the .step file so you can easily edit it yourself or just ask for the sizes you need.
In the main design it comes with bracket openings of 5,9 & 6,4 mm. You can also print them from TPU.
Secure the brackets with some 1,75 mm Filament or glue.
You can also heat the brackets up a little and press the portafilter in place to get a perfect fit xD
This Design is based on a 81 mm Diameter of the Portafilter “wings”. If you need it bigger or if smaller ones doesn't fit nicely you can also contact me.
Have fun!