Counting matching models…
I was unable to buy them, so I replicated them. Use only if necessary and at your own risk. But they work just like the original for me. The shape is a bit different due to printing without supports. You should print with more resistant…
RockShox purple bottomless token / volume spacers. This is for 2023 RockShox Super Deluxe Shocks that use the thinner purple volume spacers. I printed it on my Mini, with X and Y sizing set to 101.3% and Z to 100.5% in the slicer. Printed…
This portafilter is the result of my quest to reduce the number of espresso accessories on my counter. It's bottomless, fits standard Gaggia-compatible portafilter baskets, and best of all, lays down flat on the counter for one-handed…
Heyho Here I have a Holder for the Superkop portafilter & the Varia VS3 Grinder. It is made out of 2 Parts and 2 accessories. A) Holder - Simply click it into place! B) Tensioner - Tension the holder arms so the system is more stable! *C)…
Compact solution to store and use portafilter, leveler and tamper.
This is a Remix from Damek’s design to be able to use his design with bottomless portafilters, as they differ a lot on sizes. I made this portafilter holders to be compatible with Shades of Coffee’s bottomless portafilter , other…
This tamping stand suits a specific 54mm bottomless portafilter I bought on AliExpress (to suit a Breville espresso machine). The portafilter still appears to be available for purchase in 2022. I've included a picture of the portafilter…
This is a remix from my design of the Pusi Negotiator , but redesigned to fit the Sworksdesign Bottomless Dripper . Also included is a file for the Glass version of the Bottomless Dripper . Note on nomenclature: Pusi (푸시) is the Korean…
Rockshox token for 35 mm stanchion, token diameter 30 mm, screw thread M27x1
This is a stand I designed for the Breville 58mm Bottomless portafilter so it is easier to tamp it. Category: Kitchen & Dining BE SURE TO PRINT WITH FOOD-SAFE MATERIALS AND A FOOD-SAFE NOZZLE LIKE STAINLESS STEEL
I wanted something that I could use as a tamping station that can hold my NOTSEK 54mm Bottomless Portafilter , Normcore 53.3mm Spring Loaded Tamper and a custom puck screen holder ( that can be found here ) that holds 54mm puck screens.…
I just removed the bottom of the crate to make a stackable extension. Uses original sides and is foldable like the original. You can stack as many as you want to make taller. Clamp is to hold the 2 layers together at the short ends.
printed in K1C fully enclosed with white eSun petg oriented as shown without brim or supports
Tired of emptying out your Nespresso waste bin so often? This bin replaces the factory bin with one that doesn't have a base, allowing the used capsule area to expand into the space below and fit another 2 capsules. This model fits with…
Update: I no longer use the Breville Bambino, but made a remix to make the portafilter wing holder and handle arm taller in an attempt to account for spouted portafilters! Not sure if this has enough clearance so please make measurements…
A bottomless portafilter holder for Eureka Specialita with a 68.5 diameter. The part can screw in the exististing holder for the fork.
A friend of mine likes coffee a lot and has a Rocket espresso maker with this Clive Style 7 Portafilter that he wanted a good fit for: https://clivecoffee.com/products/clive-style-7-bottomless-portafilter . I custom-made him this tamping…
A more polished design for the negotiator. I try to make it in the same design style as the dripper itself. Downside is that it probably require support to print on a regular FDM machine. Maybe I'll make another version to fix that. For…
Version(s) V1.0 - 15Nov24 - Initial Design ---- Description Bottomless portafilter holder & tray combo. Slides back and forth a little to aid with pressing the start button. The recess at the back will stop any vibration that makes it…
A simple tamping stand for a bottomless 58mm portafilter. My cheapo bottomless portafilter has different dimensions than my “official” Rancilio portafilter, So i needed a slightly different tamping stand for it. I designed this one and it…
Added a version for the much better portafilter sold at Amazon . Use the STL with Amazon in the name. This is what I use myself now. This tamper station is made for the bottomless portafilter that is sold on Ali Express for the Gaggia…
This is designed specific to the dimension on the Normcore Breville espresso machine portafilter. The Normcore portafilter was slightly different than the Breville portafilters and using other funnels didn't quite fit. The inside…
Minimalist Stand for 58mm Bottomless Naked Portafilter. Compatible with a wide range of 58mm bottomless / naked portafilters and height adjustable model files (~16mm min height) This model is comprised of two parts which screw together…
I wasn't willing to buy a donor machine to get an original portafilter, so I've designed one to fit the Microcimbali with a 51mm filter basket. It should fit nearly any double 51mm filter basket but if you print this and it doesn't fit…
Heyho Here I have the variable Holder for more portafilters on the Varia VS3 Grinder. I always recommend the VS3 with the bean propeller to have them not sticking to the walls :D…
A simple stand / tamp station for a 58mm bottomless portafilter sold by ShadesOfCoffee Printed in PETG with 15% infill, 2 wall loops on a BambuLabs P1S
Tamping station to hold bottomless portafilter flat while tamping. Indentations on the bottom are for magnets that will line with my modular tamping station. Portafilter used was the LILQ 54mm Bottomless Naked Portafilter with the Walnut…
Espresso Puck Prep Station to both level and elevate a Rancilio Silvia Bottomless Portafilter https://amzn.to/4hn7AzP . Modular 2-part print (separate leveler and riser) Leveler levels and stabilizes the naked portafilter so it's…
This tamping stand supports the Profitec bottomless portafilter. I made it compatible with Umikot long-tab WDT . Check out my other coffee gear . Please like, make, and provide feedback so that I can improve. Thank you!
This model is adjusted to fit the NEOUZA 51mm Bottomless Portafilter from amazon.
This removes a section of material from the original portafilter hook design on the base that interferes with easily removing and installing the portafilter. Especially when using an aftermarket bottomless portafilter. This requires…
This is made specifically for the OEM bottomless portafilter. I used 10% infill, which gives it a quicker print and enough strength so even a guy my size can't bust through it while tamping.
Knodos's V3 Tamping Station has an obnoxious habit of letting bottomless portafilters tip out. This print let's you replace the existing support with one that will contact the portafilter further out underneath it's center of balance to…
Tamp station for 58mm bottomless portailt that fits on the Gaggia classic pro
Inspired by https://www.thingiverse.com/thing:4378235 , I wanted something that is closer to the unit and worked with my 51mm portafilter. Print Settings Printer: BIQU B1 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 50% Filament:…
I was tired of unscrewing the bottom of the device every time I wanted to modify something inside. So I decided to run the printer without a floor. I designed these corner brackets so that it still stands on its feet. You can use the…
Here's another tool organizer I use in my espresso machine repair shop. Husky makes a “deep” socket, more or less it is bottomless. I designed this to fit just the MM's and the extension. It features 2 hooks (no support needed!) to…
I like to use my bottomless portafilter, unfortunately this doesn't work well in combination with the Eureka Mignon Libra because it doesn't give a good grip. For this reason, I have designed a "base" that is clamped into the portafilter…
I tried different holders available online but was not satisfied, so I am adding this one to the mix. This one has no bottom, which I prefer because cleaning ceramic is typically easier than cleaning a plastic tray. However, you can…
This is a case that fits the Sworksdesign Bottomless Brewer screens. The lid screws onto the bottom. Left some height free in case more screens are released in future. Should be a support less print, just print each piece flat.
Holder for a Rancilio Bottomless Portafilter, allowing the portafilter to remain level on your work surface
Adjusted the design to work with my 51mm portafilter holder and flattened out the top to make it compatible with 2 and 3 hooks/clips? (I cannot find what those things are called. Print Settings Printer: BIQU B1 Rafts: No Supports: Yes…
bottomless blank pot to double the space post make if you print <3
I designed an adapter for this cheap mirror from AliExpress: https://www.aliexpress.com/item/1005005835710481.html Printed in TPU for a snug fit to the two attachment holes on the backside of the mirror. I use a low drip tray, so the…
Hibrew H10A Drip Tray for bottomless portafilter or portafilter without spout (you can unscrew it from your portafilter)
A stand for a 58mm Profitec bottomless portafilter (with dosing ring) on an MHW-3Bomber mini coffee scale, sized for a Eureka Mignon grinder. Allows you to grind hands-free and weigh the output at the same time. I set it up so it slides…
made a minimal holder for my Normcore Slim bottomless portafilter, didnt see any that fit the slim version specifically to lay flat on the table
Wenn man einen bodenlosen Siebträger hat und nur selten mal einen doppelten Auslauf benötigt. Gemacht für die Decent DE1. Ob der Adapter auch an anderen bodenlosen Siebträgern hält weiß ich nicht. Gedruckt mit von der FDA zugelassenem…
My LM Bottomless with Pesado would not sit on the Zerno PF holder due to shape and balance so this adapter makes it all work.
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
Stand made for modified De'Longhi Stilosa (51mm 2-ears) portafilters. The bottom has three spots for 12mm rubber feet. NOTE : A stock, unmodified portafilter will not fit this stand. This is made specifically for modified Stilosa…
See @Adam_113335 Timemore Sculptor Portafilter Holder
Ensures that the bottomless portafilter remains attached to the Eureka Atom on its own. Fits Eureka Atom 60 / 65 / 75 with the standard fork.
Bottomless portafilter for when you need a replacement for the original one or you just want to see your shot being pulled. The idea is from Max(Spongolia) over at home barista (…
I needed a stand for prepping my espresso shot using a bottomless portafilter. This model is designed around a Normacore 54mm portafilter but you can adjust the basket holder and handle holder parts to fit yours with the included Fusion…
A minimalistic tamping base for the IKAPE 54mm Bottomless Portafilter. Printing Instructions: Layer Height: 0.2mm Perimeters: 3-4 Infill: 15%
An adjustable magnetic mirror attachment to allow you to inspect your espresso extraction through a bottomless portafilter without climbing under the machine. Two versions provided: 90deg - the magnets mount to a metallic corner of the…
This file is a replacement for the Quest VR controller cradle on the X-Arcade Tankstick-VR/Arcade2TV-XR controller. I purchased straps for my controllers and the loop it adds to the bottom prevents the controllers from fitting fully into…
This adapter holds both, a normal and bottomless portafilter in Quickmill machines with integrated mills. It is compatible with the standard metal holder, to be placed on top. Secure it in place with just some double-sided tape. A small…
Printed in TPU, produces a snug fit around 54mm portafilter. Designed for bottomless portafilters. Makes needling and tamping easier. I designed this one to be a lower overall profile than other portafilter stands.
A simple tamping stand for the Gaggia naked/bottomless portafilter. Bottomless portafilters cannot rest flat on a worktop because the basket protrudes below the body. This holder supports the portafilter securely and level, providing a…
A compact, integrated stand for a standard Rancilio bottomless portafilter, designed to accommodate the Umikot 58 with 24 mm long tabs . The stand supports the portafilter beneath its ears while leaving clearance for the Umikot to drop…
Espresso Puck Prep Station to both level and elevate a Rancilio Silvia Bottomless Portafilter https://amzn.to/4hn7AzP . Modular 2-part print (separate leveler and riser) Leveler levels and stabilizes the naked portafilter so it's…
This file is a replacement for the Quest VR controller cradle on the X-Arcade Tankstick-VR/Arcade2TV-XR controller. I purchased straps for my controllers and the loop it adds to the bottom prevents the controllers from fitting fully into…
This is a remix of my VS3 Portafilter Holder to fit the VS4 Important note: This Holder should fit for portafilter up to the following dimensions: EBM 77 mm up to 86 mm KH 5,9 mm and 6,4 mm (2 Inserts printable) So if your portafilter…
I really liked the idea of that simple tamping station but my umikot has long tabs (for protecting the needles). so I extended the cutouts to fit. another change i did was to change the angle of the handle support to better fit the lelit…
This is a remix of my VS3 Portafilter Holder to fit the VS4 Important note: This Holder should fit for portafilter up to the following dimensions: EBM 77 mm up to 86 mm KH 5,9 mm and 6,4 mm (2 Inserts printable) So if your portafilter…
made a minimal holder for my Normcore Slim bottomless portafilter, didnt see any that fit the slim version specifically to lay flat on the table
