1 / 4
Anycubic Mega S Bottomless Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I was tired of removing the bottom every time I wanted to modify something inside. For that I made this bottomless feet.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 29
- Makes
- 1
- Views
- 373
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I was tired of unscrewing the bottom of the device every time I wanted to modify something inside. So I decided to run the printer without a floor. I designed these corner brackets so that it still stands on its feet.
You can use the original screws of the bottom plate but for the rubber feet you need a bit longer M5 screws, I used M5x12. You also need M5 nuts.
OpenSCAD file attached, feel free to modify.
If you like my design, please post a rated Make and leave a like. Thank you!