Anycubic Mega S Bottomless Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was tired of removing the bottom every time I wanted to modify something inside. For that I made this bottomless feet.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of unscrewing the bottom of the device every time I wanted to modify something inside. So I decided to run the printer without a floor. I designed these corner brackets so that it still stands on its feet.
You can use the original screws of the bottom plate but for the rubber feet you need a bit longer M5 screws, I used M5x12. You also need M5 nuts.
OpenSCAD file attached, feel free to modify.
If you like my design, please post a rated Make and leave a like. Thank you!