Tamping stand for 58mm bottomless portafilter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My Rancilio tamping stand doesn't work with my no-name bottomless portafilter. Thought I'd share my design.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 77
- Makes
- 0
- Views
- 453
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple tamping stand for a bottomless 58mm portafilter. My cheapo bottomless portafilter has different dimensions than my “official” Rancilio portafilter, So i needed a slightly different tamping stand for it. I designed this one and it does the job. It, too, is bottomless to keep with the theme and also reduce printing time.
Printing suggestions:
- PETG recommended.
- Print with 3 perimeters.
- Print with variable layer height, the higher the layer height the better.
- Either use 10% lightning infill, or 0% infill.
I printed with a 0.6 nozzle, but 0.4 is just as good, although a bit slower.
I've included the OpenScad file in case you want to tweak the dimensions a bit before printing.