Tamping stand for 58mm bottomless portafilter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My Rancilio tamping stand doesn't work with my no-name bottomless portafilter. Thought I'd share my design.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 453
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple tamping stand for a bottomless 58mm portafilter. My cheapo bottomless portafilter has different dimensions than my “official” Rancilio portafilter, So i needed a slightly different tamping stand for it. I designed this one and it does the job. It, too, is bottomless to keep with the theme and also reduce printing time.
Printing suggestions:
- PETG recommended.
- Print with 3 perimeters.
- Print with variable layer height, the higher the layer height the better.
- Either use 10% lightning infill, or 0% infill.
I printed with a 0.6 nozzle, but 0.4 is just as good, although a bit slower.
I've included the OpenScad file in case you want to tweak the dimensions a bit before printing.