1 / 3
Pusi Negotiator for Sworksdesign Bottomless Dripper (for both Tritan and Glass versions)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Negotiator for wave filters on the Sworksdesign Bottomless Dripper (for both Tritan and Glass versions)
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 162
- Makes
- 1
- Views
- 732
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix from my design of the Pusi Negotiator, but redesigned to fit the Sworksdesign Bottomless Dripper.
Also included is a file for the Glass version of the Bottomless Dripper.
Note on nomenclature: Pusi (푸시) is the Korean word for PUSH. Thanks to EAF member @heytchap for the name.
Printing tips:
- There are some chamfers so its best to use low layer height 0.16mm or lower for visuals, but go nuts with layer height if you don't care about looks.
- Recommend PETG if you use hot water to rinse filters, otherwise PLA/PLA+ is fine.
- Extra walls and higher infill recommended (but not needed) to give a more solid feel to the shaft / handle.
- You may also want to print with ironing on top layer for a nicer finish.
- No supports needed, just print flat on the bottom.