1 / 3
Pusi Negotiator for Sworksdesign Bottomless Dripper (for both Tritan and Glass versions)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Negotiator for wave filters on the Sworksdesign Bottomless Dripper (for both Tritan and Glass versions)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 732
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix from my design of the Pusi Negotiator, but redesigned to fit the Sworksdesign Bottomless Dripper.
Also included is a file for the Glass version of the Bottomless Dripper.
Note on nomenclature: Pusi (푸시) is the Korean word for PUSH. Thanks to EAF member @heytchap for the name.
Printing tips:
- There are some chamfers so its best to use low layer height 0.16mm or lower for visuals, but go nuts with layer height if you don't care about looks.
- Recommend PETG if you use hot water to rinse filters, otherwise PLA/PLA+ is fine.
- Extra walls and higher infill recommended (but not needed) to give a more solid feel to the shaft / handle.
- You may also want to print with ironing on top layer for a nicer finish.
- No supports needed, just print flat on the bottom.