1 / 10
Scorpion EXO-GT SP Air Chin Mount — zdjęcie 1
1 / 10

Scorpion EXO-GT SP Air Chin Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A precision-fit chin mount for the Scorpion EXO-GT SP Air helmet. Compatible with all GoPro-style quick-release mounts.

Ocena
5 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
469
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

This custom chin mount is designed specifically for the Scorpion EXO-GT SP Air helmet, using a high-resolution 3D scan of the actual shell to achieve an exceptionally accurate fit. The geometry follows the helmet’s curvature precisely, providing a large contact surface for increased stability and long-term adhesion, even during dynamic riding conditions.

Despite the close fit, the mount is fully shaped around the central intake, allowing the front air vent to be opened and closed easily, even with the camera installed. Fits all action cameras that use the GoPro quick-release system, such as GoPro, Insta360, and DJI models.

Key Features

  • Scan-based design for true contour matching to the Scorpion EXO-GT SP Air helmet

  • Enlarged contact area for superior adhesion and vibration resistance

  • GoPro-style quick-release compatible with tight fit and zero play

  • Ventilation fully accessible with the camera mounted

  • Smooth surface geometry, ideal with fine-layer printing

  • Slim, functional profile that does not interfere with the helmet’s aerodynamics

Recommended Print Settings

For maximum strength and optimal surface finish:

  • Material: PETG

  • Perimeters/walls: 5

  • Infill: 30% gyroid

  • Layer height: 0.15 mm

  • Supports: None

To match SOLID MATT PEARL BLACK helmet version use Prusament PETG Prusa Galaxy Black filament.

Installation Instructions

  1. For best adhesion and safety, proper surface preparation is essential:

  2. Clean both the print and the helmet thoroughly using isopropyl alcohol (IPA).

  3. Apply a high-bond adhesive tape – 3M GPH-160GH is strongly recommended for curved surfaces. Use 9 mm wide tape on bottom edge and two 6 mm wide pieces on each horizontal edges.

  4. Before attaching, warm the adhesive (e.g., with a hairdryer) to activate the bonding layer.

  5. Center the mount on the chin area of the helmet and apply firm, even pressure.

  6. Allow the adhesive to fully cure according to 3M guidelines before riding.

Tagi