1 / 7
Tape Dispenser - Quick and Easy Printing (No Supports) — zdjęcie 1
1 / 7

Tape Dispenser - Quick and Easy Printing (No Supports)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

✂ Tape Dispenser - Quick and Easy Printing (No Supports)

Ocena
0 / 5
Polubienia
7
Pobrania
18
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

✂ Tape Dispenser - Quick and Easy Printing (No Supports) 

📐 Add a unique and functional touch of design to your desk with this Tape Dispenser! It's not just a handy dispenser for your scotch tape, but also a true design object. 

The main advantage? It's engineered for incredibly easy and clean 3D printing, requiring no supports! 

Recommended 3D Printing Features: 

Filament: PLA 

Layer Height: Optimized for robust and fast printing at 0.2 mm or less (e.g., 0.16 mm for greater detail). 

Supports: NO SUPPORTS REQUIRED! The geometry was designed for perfect FDM printing. 

Infill: 15-20% to ensure stability and weight during use. 

Assembly: The design is ready to completely hide the tape roll inside (as shown in the image), and the outer case snaps into place, so you'll need to push a little harder, but don't force it too much. 

👉 Print this spiral tape holder in no time, without the stress of removing the backing, and organize your workspace in style!

Tagi