Multiboard Hex Deburring Tool Holder (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed Multiboard deburring holder with a precise hex pocket for common hex tools, plus blade case storage.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 135
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix adapts the original Multiboard deburring tool holder by JoKneeMo to support the common hex-handled deburring tool (example: https://a.co/d/5BaNzVB). The internal tool cavity has been completely redesigned with a full-depth hex profile sized for these smaller tools, while preserving the original design’s blade case holder and single integrated Multiboard snap mount.
Only the internal tool pocket was modified — all external dimensions, alignment geometry, and Multiboard compatibility remain unchanged, ensuring seamless integration with existing Multiboard setups.
This design continues to follow the Multiboard component guidelines, including the use of the Moderate Weight Bearing Snap, originally defined here by JoKneeMo:
🔗 https://thangs.com/designer/Multiboard/3d-model/Weight-Bearing%20Directional%20Snap-989145
Printing Recommendations
Material: PLA or PETG
Layer Height: 0.20 mm
Infill: 15%
Walls: 3 or more
Supports: Not required
Orientation: Print upright as provided
Notes
I may upload an additional variant later that supports interchangeable bushing inserts for different tool sizes or profiles.
Attribution (Required by License)
Remix of “Deburring Tool and Blade Holder for Multiboard” by JoKneeMo, licensed under CC BY 4.0.
Original model: https://www.printables.com/model/912831-deburring-tool-and-blade-holder-for-multiboard
Snap standard reference:
https://thangs.com/designer/Multiboard/3d-model/Weight-Bearing%20Directional%20Snap-989145