ATX PSU Brackets for Acer Aspire TC-895
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are designed to accommodate for an ATX PSU inside of Acer Aspires (like the TC-895) that don't use ATX PSUs.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I designed these models for one simple reason: I am cheap.
I was wanting to get a 500W+ PSU for my Acer Aspire TC-895 to install a decent GPU in.
There lied a problem, however.
The case allows only for TFX, despite having room for an ATX PSU, as was used on the TC-885.
I couldn't do a case transplant, either, because the IO didn't match up.
Thus, I turned to designing these.
These are meant to accommodate a full ATX PSU while still utilizing the TFX mount on the back of the case. Feel free to use these however you like.
Print them out, redesign them, I don't mind.
Additional Notes:
I. ONLY DESIGNED TO WORK WITH ACER ASPIRE TC-895 PCs - I cannot guarantee they'll work with other TFX-based PCs without modification or redesign
II. PSU cables MUST be long enough to reliably make it into the required parts of the case
III. Screenshots from Tinkercad, as I haven't printed them out yet because I don't have a 3D printer
IV. Models were designed in Tinkercad
V. Measurements may be slightly inaccurate
EDIT:
VI. Cables must be longer than that of the original PSU
VII. To hold the bracket with screws, you must either insert your own threads or use nuts and bolts.