ATX PSU Brackets for Acer Aspire TC-895
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are designed to accommodate for an ATX PSU inside of Acer Aspires (like the TC-895) that don't use ATX PSUs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I designed these models for one simple reason: I am cheap.
I was wanting to get a 500W+ PSU for my Acer Aspire TC-895 to install a decent GPU in.
There lied a problem, however.
The case allows only for TFX, despite having room for an ATX PSU, as was used on the TC-885.
I couldn't do a case transplant, either, because the IO didn't match up.
Thus, I turned to designing these.
These are meant to accommodate a full ATX PSU while still utilizing the TFX mount on the back of the case. Feel free to use these however you like.
Print them out, redesign them, I don't mind.
Additional Notes:
I. ONLY DESIGNED TO WORK WITH ACER ASPIRE TC-895 PCs - I cannot guarantee they'll work with other TFX-based PCs without modification or redesign
II. PSU cables MUST be long enough to reliably make it into the required parts of the case
III. Screenshots from Tinkercad, as I haven't printed them out yet because I don't have a 3D printer
IV. Models were designed in Tinkercad
V. Measurements may be slightly inaccurate
EDIT:
VI. Cables must be longer than that of the original PSU
VII. To hold the bracket with screws, you must either insert your own threads or use nuts and bolts.
