1 / 3
Cooling duct for Ender 3 V1 4010 Fan
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own designed Ender 3 cooling duct. Easily installed in place of the original duct.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I wasn't satisfied with the stock cooling on my Ender3, so I made this minor upgrade. I've attached two files below: one without support, and one with my custom supports. They're not perfect, but they work. I printed it at a 0.12mm layer height and a 0.4mm nozzle. However, I would recommend printing this part with a smaller nozzle (0.2mm, maybe even 0.1mm), as the walls are quite thin for a 0.4mm nozzle. If you have any questions or ideas, let me know.