1 / 9
Wing Mount for Team Corally Punisher (MLine) - original Part C-00180-005-2 — zdjęcie 1
1 / 9

Wing Mount for Team Corally Punisher (MLine) - original Part C-00180-005-2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Wing Mount for Team Corally Punisher (MLine) and likely on other Team Corally models (original Part C-00180-005-2)

Ocena
0 / 5
Polubienia
1
Pobrania
51
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

German
Mein Design dient als Ersatz für den original Flügelbefestigung (C-00180-005-2).
Es funktioniert beim Team Corally Punisher (MLine) und auch bei anderen Modellen von Team Corally, die diese Flügelbefestigung mit der originalen Teilenummer C-00180-005-2 haben.

Originale Flügelmontage-Verbindungsstrebe (C-00180-539) wird nicht mehr benötigt.

Ich habe den linken und rechten Flügelhalter in TPU mit 20% Infill gedruckt.
Den mittleren Flügelhalter habe ich in PETG mit 100% Infill gedruckt.
Ich denke, dass es nur Sinn macht den linken und rechten Flügelhalter in flexibelen Filamenten zu drucken. Der mittlere Flügelhalter sollte nicht in flexibelen Filament gedruckt werden.

Für die Montage wird noch folgende Hardware benötigt:
- 2x M3x50 ISO7380 oder DIN912
- 2x M3 selbstsichernde Muttern

English
My design serves as a replacement for the original wing mount (C-00180-005-2).
It works on the Team Corally Punisher (MLine) and also on other Team Corally models that use this wing mount with the original part number C-00180-005-2.

The original wing mount connecting brace (C-00180-539) is no longer needed.

I printed the left and right wing mounts in TPU with 20% infill.
I printed the center wing mount in PETG with 100% infill.
I think it only makes sense to print the left and right wing mounts in flexible filament.
The middle wing mount should not be printed in flexible filament.

The following hardware is also required for assembly:
- 2x M3x50 ISO7380 or DIN912 screws
- 2x M3 self-locking nuts

Tagi