PB 6465 Insider mount ikea skadis T-nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
is a mount for the PB 6465 Insider 8-in-1 Screwdriver, it uses the Skadis T-Nuts Mounting System made by @6d6178
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
| Skadis T-Nuts Mounting System for Ikea Skadis Pegboards made by @6d6178 |
Instructions:
First, you’ll need to print the file for the M2 T-Nut (linked above). Print at least two of them.
You will also need two M2 × 16 screws and two M2 nuts.
Printing Instructions:
Print with no supports. Use a 0.2 mm layer height or finer for best fit and finish.
I printed mine in translucent gray PETG to match the look of the screwdriver, but any similar material will work.
Assemble it like this:
If you want to support me, feel free to share this project or leave a comment!
You can also DM me if you have any questions or run into any issues.
buy me a coffee : https://buymeacoffee.com/bob_l