PB 6465 Insider mount ikea skadis T-nut
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
is a mount for the PB 6465 Insider 8-in-1 Screwdriver, it uses the Skadis T-Nuts Mounting System made by @6d6178
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
![]()
| Skadis T-Nuts Mounting System for Ikea Skadis Pegboards made by @6d6178 |
Instructions:
First, you’ll need to print the file for the M2 T-Nut (linked above). Print at least two of them.
You will also need two M2 × 16 screws and two M2 nuts.
Printing Instructions:
Print with no supports. Use a 0.2 mm layer height or finer for best fit and finish.
I printed mine in translucent gray PETG to match the look of the screwdriver, but any similar material will work.
Assemble it like this:
If you want to support me, feel free to share this project or leave a comment!
You can also DM me if you have any questions or run into any issues.
buy me a coffee : https://buymeacoffee.com/bob_l
