Filament waste bin for BambuLab X1C and furniture KALLAX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waste bin for BambuLab X1C and IKEA furniture "KALLAX". The waste will be leaded inside the drawer.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The BambuLab X1C fits perfectly on the furniture KALLAX from IKEA. But if you want to place these two parts against a wall, you have a problem with the filament waste. I have solved this problem by developing a slide, that leads the waste inside the drawer and in a bin that is placed inside the drawer. The parts can be printed without supports, but need to be glued together.
You also need to make a cutout on the back wall of the KALLAX and you a total of 6 screws to mount the top and the lower part of the tube.
Material:
- Filament for all bodies: PLA+ tough black from BambuLab
- Screws for top tube: 2x plastic screws 3x16
- Screws for bottom tube: 4x counter sunk wood screws 3x16
- Glue: Instant adhesive
Please enjoy my model.
