1 / 2
20x20mm to 25.4x25.4mm adaptor for whoop flight controller stack mounting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 221
- Wydruki
- 0
- Wyświetlenia
- 829
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Simple adaptor for mounting a whoop stack to a 20x20 mount, can be reversed to do the opposite. I will be using it to mount a happymodel diamond dvr vtx to a 20x20 mount.
Holes should be tight enough for the screws to bite, so nuts shouldn't be needed. Print in TPU for best results.
Category: R/C Vehicles