Legami headphone cuffie frame 2025
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement frame for the "Pop to the top" headphones by Legami.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I made this to practice using OnShape. Here are the projects, you can tweak them or add some personalization:
Otherwise, download and plate the two halves so that the hinge sections are printed horizontally. Enable all supports (not only bed suports), and make restrictions in the holes. I used PETG. After printed, connect them and weld the seams. I first tried heating up the slot and insert, but it's pretty difficult to connect them when they're soft. It's strong enough without doing this.
Later I'll add a photo of the results and the exact dimensions of the frame so you can determine if it will fit your exact pair of Legami headphones.
I left a "name plane" in the onshape project so you can extrude some letters or an SVG 1-2mm into the frame and it should be legible, even though it's not perfect.