Legami headphone cuffie frame 2025
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement frame for the "Pop to the top" headphones by Legami.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I made this to practice using OnShape. Here are the projects, you can tweak them or add some personalization:
Otherwise, download and plate the two halves so that the hinge sections are printed horizontally. Enable all supports (not only bed suports), and make restrictions in the holes. I used PETG. After printed, connect them and weld the seams. I first tried heating up the slot and insert, but it's pretty difficult to connect them when they're soft. It's strong enough without doing this.
Later I'll add a photo of the results and the exact dimensions of the frame so you can determine if it will fit your exact pair of Legami headphones.
I left a "name plane" in the onshape project so you can extrude some letters or an SVG 1-2mm into the frame and it should be legible, even though it's not perfect.