Liftmaster Garage Door Opener Light Diffuser 41a5021-1f
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement light diffuser for liftmaster garage door opener circa early 2000's
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement light diffuser for liftmaster early 2000's model(s). Posting two versions.
1) Thickness compatible with original
2) Thin wall.. 1.7mm so that will be three layers.
The corners have more material around the mounts points since thin wall requires good adhesion. I have two garage doors so the thin wall is the upgraded design.
Note the photo with the light on showing the bright spot is the camera, not the appearance. Clear PETG. This replacement assumes use of an LED bulb and not incandescent.
It will print white on most default print profiles.
Supports to the corners and clips.... support from plate setting may add some support on the bottom curve as well.