HC Vesper You Ain't Got No Darts Notification Stimulator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces your stock follower with a magnet for HC Vesper Dart Sensing.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 229
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a printed follower that'll hopefully allow for dart sensing for the HC Vesper. I just took an image from the listing off of M416 Gel Blasters and based the magnet position off that and copied a follower from a Diana magazine. It currently uses 4mm x 1.5mm magnets, which can be found on Amazon for like 7$ in packs of 120, so go crazy.
Works well either printed flat on the bottom or on the long side edge. The stock tolerances are decent, and the drum spring does a good job of keeping it centered, so I wouldn't worry too much about post processing it. Magnets are a firm press fit, but glue would be a good idea.
I have gotten my Vesper in today (31 Jan 26) and I can confirm this part works with the dart sensor!