Grand Kaleidoscope Christmas Ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An elegant and flowing Christmas ornament design that looks different from every angle.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Yes, this needs supports. Use organic supports. An overhang angle of at least 30 degrees works well. I use a support blocker on the top loop. It prints better with supports, but it prints well enough without them.
I use just a single perimeter everywhere except the top and bottom 5mm and 14mm in the middle of the ornament where the wings intersect.
I use 15% lightning infill throughout the model. that handles most of the areas that need support, but there are a few areas that need more supports. So, I have a few cube modifiers sized to roughly 5mm x 10mm and 0.45mm to 1.8mm thick with between 20% infill and 80% infill.
I've provided my PrusaSlicer project file and my GCODE for a Prusa MK3S+ printer.