Grand Kaleidoscope Christmas Ball
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An elegant and flowing Christmas ornament design that looks different from every angle.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 67
- Makes
- 0
- Views
- 236
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Yes, this needs supports. Use organic supports. An overhang angle of at least 30 degrees works well. I use a support blocker on the top loop. It prints better with supports, but it prints well enough without them.
I use just a single perimeter everywhere except the top and bottom 5mm and 14mm in the middle of the ornament where the wings intersect.
I use 15% lightning infill throughout the model. that handles most of the areas that need support, but there are a few areas that need more supports. So, I have a few cube modifiers sized to roughly 5mm x 10mm and 0.45mm to 1.8mm thick with between 20% infill and 80% infill.
I've provided my PrusaSlicer project file and my GCODE for a Prusa MK3S+ printer.