RackSlide Raspberry Pi 4 Drawer with DeskPi KL-P24 [with optional OLED]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want HDMI and power on the front of your Raspberry Pi 4? Yes! How about the ability to remove it quickly? Double yes!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a Raspberry Pi 4 and a DeskPi KL-P24? Let's make a sweet drawer!
Bill of Materials:
I have listed everything needed, but feel free to substitute with items you may already own.
- Raspberry Pi 4
- Suitable power source
- DeskPi KL-P24: https://www.amazon.com/dp/B0D9LDQ7DY
- M2 x 6mm self-tapping screws for handle and OLED cover.
- M2.5 (or M2.6) self-tapping screws for the fan mount and drawer handles.
- Example self-tapping set: https://www.amazon.com/dp/B0D3KV7RVP/
- M2.5 bolts and nuts: M2.5 x 6mm for the Raspberry Pi (in lieu of fan mount), M2.5 x 8mm for the DeskPi KL-P24.
- Example bolt and nut set: https://www.amazon.com/gp/product/B0FF4T7RD6/
- Micro USB Panel Mount: https://www.amazon.com/dp/B0BJKM43FK
- This may or may not come with M3 screws
- [Optional] 30mm Fan and Heatsink kit: https://www.amazon.com/dp/B07PHGTJKK
- [Optional] Power button: https://www.amazon.com/dp/B075LDGHHS
- [Optional] 128x32 OLED: https://www.amazon.com/dp/B0D2NRMHM9
- [Optional] Female to Female Dupont Jumper Wires for OLED and shutdown button: https://www.amazon.com/dp/B07GD312VG
Assembly Directions:
- Screw on handles with M2 x 6mm self-tapping screws
- [Optional] Affix 128x32 OLED with pins facing towards outside of unit
- Use M2 x 6mm self-tapping screws to affix the OLED cover
- Note: Make sure cutout on OLED cover is facing the circuits on OLED.
- Use M2 x 6mm self-tapping screws to affix the OLED cover
- Combine the Raspberry Pi with the DeskPi KL-P24 and place in the drawer
- Affix the DeskPi KL-P24 into the drawer with M2.5 x 8mm bolts and nuts.
- [Optional] Assemble fan on top of the fan mount
- Attach the Raspberry Pi to the drawer
- Either use the M2.5 x 6mm bolts and nuts OR use M2.5 (or M2.6) self-tapping screws into the fan mount.
- [Optional] Push the button cut-out from the inside out, clean the plastic remnants, and insert your button.
- Recommended to solder your Dupont wires to the button before installation
- Wire up the Raspberry Pi and enjoy!
Notes:
- The DeskPi KL-P24 comes with a bunch of hardware, it is not necessary for this build.
- I do not have any software to drive the power button or OLED at this time, but my plan is to create a simple script for this eventually.
Look through all of the “Medium” RackSlide models here: https://www.printables.com/@ChrisKewl/collections/2854232
See all of my RackSlide models at: https://www.printables.com/@ChrisKewl/collections/2849415
Did you enjoy this model? Help support me with a tip: https://ko-fi.com/chriskewl