1 / 3
RackSlide Raspberry Pi 4 Drawer with DeskPi KL-P24 [with optional OLED]
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Want HDMI and power on the front of your Raspberry Pi 4? Yes! How about the ability to remove it quickly? Double yes!
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 41
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Got a Raspberry Pi 4 and a DeskPi KL-P24? Let's make a sweet drawer!
Bill of Materials:
I have listed everything needed, but feel free to substitute with items you may already own.
- Raspberry Pi 4
- Suitable power source
- DeskPi KL-P24: https://www.amazon.com/dp/B0D9LDQ7DY
- M2 x 6mm self-tapping screws for handle and OLED cover.
- M2.5 (or M2.6) self-tapping screws for the fan mount and drawer handles.
- Example self-tapping set: https://www.amazon.com/dp/B0D3KV7RVP/
- M2.5 bolts and nuts: M2.5 x 6mm for the Raspberry Pi (in lieu of fan mount), M2.5 x 8mm for the DeskPi KL-P24.
- Example bolt and nut set: https://www.amazon.com/gp/product/B0FF4T7RD6/
- Micro USB Panel Mount: https://www.amazon.com/dp/B0BJKM43FK
- This may or may not come with M3 screws
- [Optional] 30mm Fan and Heatsink kit: https://www.amazon.com/dp/B07PHGTJKK
- [Optional] Power button: https://www.amazon.com/dp/B075LDGHHS
- [Optional] 128x32 OLED: https://www.amazon.com/dp/B0D2NRMHM9
- [Optional] Female to Female Dupont Jumper Wires for OLED and shutdown button: https://www.amazon.com/dp/B07GD312VG
Assembly Directions:
- Screw on handles with M2 x 6mm self-tapping screws
- [Optional] Affix 128x32 OLED with pins facing towards outside of unit
- Use M2 x 6mm self-tapping screws to affix the OLED cover
- Note: Make sure cutout on OLED cover is facing the circuits on OLED.
- Use M2 x 6mm self-tapping screws to affix the OLED cover
- Combine the Raspberry Pi with the DeskPi KL-P24 and place in the drawer
- Affix the DeskPi KL-P24 into the drawer with M2.5 x 8mm bolts and nuts.
- [Optional] Assemble fan on top of the fan mount
- Attach the Raspberry Pi to the drawer
- Either use the M2.5 x 6mm bolts and nuts OR use M2.5 (or M2.6) self-tapping screws into the fan mount.
- [Optional] Push the button cut-out from the inside out, clean the plastic remnants, and insert your button.
- Recommended to solder your Dupont wires to the button before installation
- Wire up the Raspberry Pi and enjoy!
Notes:
- The DeskPi KL-P24 comes with a bunch of hardware, it is not necessary for this build.
- I do not have any software to drive the power button or OLED at this time, but my plan is to create a simple script for this eventually.
Look through all of the “Medium” RackSlide models here: https://www.printables.com/@ChrisKewl/collections/2854232
See all of my RackSlide models at: https://www.printables.com/@ChrisKewl/collections/2849415
Did you enjoy this model? Help support me with a tip: https://ko-fi.com/chriskewl