Narrow replacement feet for Kensington Rocking Foot Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement feet with narrower footprint, to make it fit with smaller desks
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement feet for the Kensignton Rocking Foot Rest SKU K58303WW.
The original foot rest was too wide to fit under my desk, but by replacing the feet, I could shave off several centimeters and make it fit, without sacrificing stability.
To change the feet, first pop off the covers on the sides of the original feet with a flat screwdriver. Unscrew the bolts underneath and remove the feet. Making sure to reuse the original bolts and plastic bushings that they screw into, reverse this process to attach the replacement feet. The bushings are covered in some dry powdered lubricant (possibly talcum powder), so if needed, you can apply some extra before assembling. Make sure to not fully tighten the screws, so that the thing can spin freely.
I also cut some strips of adhesive anti-slip rubber and attached it to the bottom surface.