P
PrintablesMonkey_Made_Mediocrity
Kensington Slimblade Pro Stand (7.25° & 10°)
As titled. Haven't found a good one that fits well, so I just make one.
- Pobrania
- 288
- Polubienia
- 23
- Ocena
- 5
Wyniki wyszukiwania: kensington
54 modeli
P
PrintablesCreative Arts and Technology Spaces
2022 Mac Studio Stand / Legs for Kensington Locks
We designed this set to be able to use the horribly placed lock / keyhole located on the bottom of the new Mac Studio in our lab setting. There are three parts: A general foot (3), a lock foot (1), and a connector piece (4). On a Prusa…
- Pobrania
- 221
- Polubienia
- 17
- Ocena
- 5
P
PrintablesType 40
Kensington Orbit Trackball base
This sits under the trackball and changes its working angle to 45 degrees which is much more comfortable for the arm and takes pressure off the carpal nerve in the wrist. I printed this with 5% infill which is plenty strong enough. Once…
- Pobrania
- 177
- Polubienia
- 7
- Ocena
- 0
P
PrintablesCueBall909
Kensington Orbit trackball mount
This is a mount for the Kensington Orbit trackball. I designed this specifically for attaching to 1530 aluminum extrusion, but it will also work for attaching to any flat surface. Has 15 chamfered screw holes for a variety of…
- Pobrania
- 164
- Polubienia
- 10
- Ocena
- 5
P
Printablesthp
Kensington Slimblade Back Button Riser
The model is designed to be printed on a regular FDM 3D printer. It should be printed on the side where the button profile is plane with the body hook. Like so: I sliced using default Sovol SV06 settings for OrcaSlicer, except: I used 3mm…
- Pobrania
- 162
- Polubienia
- 22
- Ocena
- 4,67
P
PrintablesJared DuPont
Kensington SlimBlade Stand V2
A basic stand and wrist rest for the Kensington SlimBlade trackball mouse. It has a forward tilt to eliminate the built in tilt of the mouse, and a sideways tilt of 8 degrees for better ergonomics. Additionally it has indents for the…
- Pobrania
- 152
- Polubienia
- 20
- Ocena
- 5
P
PrintablesJared DuPont
Kensington SlimBlade Stand
A basic stand for the Kensington SlimBlade trackball mouse. It has a forward tilt to eliminate the built in tilt of the mouse, and a sideways tilt of 16 degrees for better ergonomics. Additionally it has indents for the rubber feet to…
- Pobrania
- 120
- Polubienia
- 6
- Ocena
- 5
P
Printablesawestom
Kensington SD5700T bracket
A bracket to mount your Kensington SD5700T dock under your desk.
- Pobrania
- 114
- Polubienia
- 9
- Ocena
- 0
P
Printablesdziedzic99
Dust cover for Kensington lock laptop steel line hole
Print in 100% infill. Works well. Good fit. Use it to cover Kensington Lock port on your laptop or monitor. Category: Computer
- Pobrania
- 107
- Polubienia
- 2
- Ocena
- 0
P
PrintablesTimothy Nichols
Kensington Table Rolling Cart Caster Connector
Fits in to the bottom of the cart to connect the caster to the metal leg. PETG .1mm 100% infill Press fit nut into part with vice. Part is a bit tight, but a few taps from a hammer solved that.
- Pobrania
- 98
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAnodyne
Kensington SlimBlade Wedge
Wedge for the Kensington SlimBlade Trackball. The stand applies 4.8 degrees of forward tilt to negate default positive angle of the trackball. Adds 12.7 degrees of sideways tilt for a more ergonomic operating angle. Optional wedge with…
- Pobrania
- 96
- Polubienia
- 9
- Ocena
- 0
P
Printablesornjman
Under Desk Power Supply Mount for Kensington SD5700T
After printing Kensington SD5700T Under Desk Mount , the power supply was left unmounted and I was unable to find a mount. I found a universal under desk mount and customized it to fit this power supply.
- Pobrania
- 79
- Polubienia
- 7
- Ocena
- 0
P
PrintablesAlvomane
HP Elite X2 G4 Kensingtonlock Pencil Holder Stifthalter
This holder for the HP Active Pen fits into the Kensington Lock of the HP Elite X2 G4. It fits quite tight and can additionally be secured with double sided adhesive tape. In my case, tape was not necessary as the holder is designed to…
- Pobrania
- 72
- Polubienia
- 8
- Ocena
- 5
P
Printablespopatze
Kabelbefestigung für Kensington Lock
Diese Kabelbefestigung kann in die Öffnung von Kensington Lock eingesetzt werden. Mit Hilfe eines Kabelbinders kann ein Kabel z.B. an der Rückseite eines Monitors fixiert und geführt werden. -------------- This cable fastener can be…
- Pobrania
- 66
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDannar
Kensington Security Slot Stylus Holder
Tired of not having my stylus attached to my Lenovo Flex 5i, I made this stylus holder that fits into the Kensington Security Slot designed to fit the MEKO - USI Stylus Pen with a 10.05mm diameter. This holder is designed to move the…
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 0
P
PrintablesBitsplease
Kensington Slimblade Ergonomic Stand
An Ergonomic stand for the Kensington Slimblade Trackball mouse - tilts to the right and forward for maximum ergonomics. Also lifts the whole mouse slightly off the desk. All the other mounts/stands I could find for this trackball had one…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPK
Customizable Kensington Expert Mouse Wrist Rest
Customizable 3D printed wrist rest for Kensington Expert Mouse trackball The wrist rest that came with my Kensington Expert Mouse broke, so I designed and 3D printed my own. Customizing The version in the repository is made to fit the…
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 5
P
Printablesmoose0003
Kensington Expert Trackball Mouse Wrist Rest Connectcor
This is a connector piece that holds the wrist rest to the trackball for the Kensington Expert Trackball Mouse. This model appears to work for the wireless version of this mouse as well. I'm sure there are ‘better’ solutions, but this is…
- Pobrania
- 45
- Polubienia
- 12
- Ocena
- 5
P
PrintablesPolycopter
Support pour Kensington Scanner d'empreintes digitales VeriMark - K62330WW
Modèles avec vis ou aiment. Aiment : 6x3mm 4x Impression : Couche : 0.2 Remplissage : 15% Supports : oui
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPyrobi
Kensington SD4700P Dock Under Desk Bracket
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDarrenph1
Kensington Slimblade Right Remix
I just mirrored the stl file. All props go to improprietary Post-Printing Category: Electronics
- Pobrania
- 34
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSemaze
Modular Wall Mount For Kensington Dock
A modular wall mount system for the Kensington SD4839P USB C Dock. This can also be used to mount to desks/other surfaces, like tables/desks. The two screw holes on the back of the dock use M2.5 screws, and are spaced 30mm centre to…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 5
P
Printablesalphastratus
Trackball support for Kensington Orbit Trackball
This is a spring loaded clamping mechanism to mount the Kensington Orbit trackball to a sim rig. The spring allows easy access to the device for example for battery change, power switch or if it's too far away for easy use and should be…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJonybat
45º platform for Kensington Orbit trackball mount
Print with material and settings of your choice, but the heavier, the better. Then print the original model ( https://www.printables.com/model/723722-kensington-orbit-trackball-mount ) according to their recommendations. I suggest PETG…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesCharlie Essers
Crumb Tray for Kensington London Bread Box
A crumb tray for the Kensington London large metal bread box (https://www.amazon.com/gp/product/B08C7LZJMC/ref=ppx_yo_dt_b_search_asin_title) Sliced with PrusaSlicer magic to remove top and bottom. 3mf file and gcode included. Time for a…
- Pobrania
- 27
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFranky Egan
Kensington Expert Orb Mouse Battery Cover
Pesky Battery cover replacement, for when the original grows legs. kensington expert mouse battery cover
- Pobrania
- 27
- Polubienia
- 0
- Ocena
- 0
P
PrintablesKarl O
Adapter for using Kensington Expert wrist rest with Ploopy Adept
Relies on the original Kensington Expert bracket, this slots into that bracket and the two notches on the ploopy adept. Can be printed with no supports (it just has two small straight overhangs). Increase walls to 4 or 5 for some strength.
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDarren Smith
keyboard legs for kensington
dont you just hate it when you want to tilt your beyboard but one of the legs is broken
- Pobrania
- 25
- Polubienia
- 2
- Ocena
- 0
P
Printablesericvenneker
Kensington Smart Fit monitor plate
This is a replacement plate for Kensington Smart Fit monitor stands. I lost the monitor plate for this monitor stand :( so I designed a simple plate that can be used to mount my monitor. It is compatible with vesa75 and vesa100 monitors.…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
Printablesimproprietary
row of keys for kensington orbit
This is an print of mine for the kensington orbit trackball. The purpose was to have an extra row of buttons next to my fingers which i could apply common shortcuts to. To get the correct spacing between my finger and the row of keys i…
- Pobrania
- 23
- Polubienia
- 11
- Ocena
- 0
P
Printablesimproprietary
kensington slimblade stand
Made from measurements given to me, with a 1.5" lift. I designed it around having it on the left side of the keyboard, if you are interested in a right handed version your slicing software will have a mirroring feature. Category: Other
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMikisugi
Kensington Slim Type Keyboard foot
This is a keyboard foot modelled for the Kensington Slim Type Keyboard. I had played with the original a bit to much so it broke off. Because of this I remodelled a new one for the keyboard. The one that is shown in the pictures was…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDannar
Novelty Kensington Security Character Slot Stylus Holder
Tired of not having my stylus attached to my Lenovo Flex 5i. I originally made a non-novelty version of this stylus holder, some would say a boring version, that you can find here ( Kensington Security Slot Stylus Holder ). This is…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGlenn Brockett
Foot for Kensington keyboard
Snap out foot for Kensington keyboard model M01396-K. May fit other models. The original foot is on the left in the cover photo. 2 models available: R1 (center) will require supports but is closer to the original. R2 (right) does not…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printablespermanentbrownmark
Simple Scrollwheel Retread for Kensington Expert Mouse
I've been using Kensington trackballs for the last 30 years, and they do eventually wear out. The biggest shortcoming of the modern ones is (as always) the use of rubber overmolding. The rubber on the scroll wheel eventually turns to…
- Pobrania
- 15
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJulius3E8
Kensington Bluetooth 4.0 adapter USB cap
The blue flashy light on my Kensington Bluetooth 4.0 adapter USB key is annoying. But I can't use my sexy Microsoft designer mouse on my silly Apple computer without it! So I made this clean-fitting cap to dampen the seizure-inducing…
- Pobrania
- 15
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRexRoyDesigns
Kensington Docking Station bracket
My idea is to design a bracket for this docker so it can be wall mounted on a aluminium rail on a wall, probably is going to be a two piece print. first prototype: printed vertically and glued by the middle with epoxy glue.
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
Printablesmatthewlinton
Laptop Kensington Security Slot Insert and phone holder
I like to have my phone right by my laptop screen. This allows me to rest my phone against my screen without it slipping. If you have a phone case with a little bit of grip, this might work for you. I had originally made a Laptop Phone…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStephan
Jabra 410/510 speaker Kensington lock adaptor
Kensington lock compatible adaptor for Jabra speakers 410/510, snug fit, but better to glue it in. Designed in FreeCAD
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
Printablesiovxw
Kensington Orbit scroll ring rubber replacement
r1 = 47.6 / 2 r2 = 51.2 / 2 r3 = 58.6 / 2 h = 7.5 thickness = 1
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 5
P
Printables3DFreeman
Kensington Orbit Trackball Arcade Conversion Kit
I love trackballs. I think it's because my first PC was a 386SX 20 and it came with a 3 button trackball and a 14" VGA monitor that was longer (from front to back) than it was wide. It was glorious, no soundcard, just a PC speaker... I…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJan
Kensington cable clip
This is a cable clip for Kensington lock cable passthroughs.
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDmitry Zlygin
Wedge pad for Kensington Expert trackball mouse
The Kensington Expert Trackball mouse pad that makes it horizontal and has space for a soft cushion/wrist pad. The model can be tuned in the the original FreeCAD source. Personally, I printed it twice (the first one didn't have place for…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printablesjmacz
Kensington Turbo Mouse 3 Bearing Holders
These are replacement bearing and LED holders for the Kensington Turbo Mouse 3.0.
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesjekkos
Kensington power button case
I designed a custom power button case for the Minisforum MS-S1 Max to improve usability in a compact 10-inch server rack environment. The project focused on creating a cleaner and more accessible way to control the system without needing…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesljhms
Narrow replacement feet for Kensington Rocking Foot Rest
Replacement feet for the Kensignton Rocking Foot Rest SKU K58303WW . The original foot rest was too wide to fit under my desk, but by replacing the feet, I could shave off several centimeters and make it fit, without sacrificing…
- Pobrania
- 3
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRubiaLab
MacBook Air 13" A2179 2020 Kensington Lock Station
This is a Kensington Lock station designed for the Apple MacBook Air 13" (Mid 2020, Model A2179). Since the MacBook Air has no Kensington slot for securing it on the desk, I designed this station to fix it at a place. The station fixes…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRacknos
Kensington VeriMark Desktop Fingerprint Key - Under-Desk Mount
Hi everyone, This is a custom mount/cover designed to easily attach the Kensington VeriMark™ Desktop Fingerprint Key under a desk or onto any flat surface using double-sided tape. The cover features a cutout for the cable, a slide-to-lock…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSolath
Kensington Pockethub 7 mount
Wall mount for a Kensington Pockethub 7-port USB hub. Printed in Comgrow PETG - 5 walls, 25% infill.
- Pobrania
- 1
- Polubienia
- 0
- Ocena
- 0
P
PrintablesGreenBeardCreates
Kensington Keyboard Foot
A simple quick print replacement keyboard foot. This is made for a Kensington Valukeyboard model PK1100U but I wouldn't be surprised if it fit other similar Kensington keyboards as I imagine it's a standard part. Worth trying as its only…
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
Printables
Kensington SD4700P Dock Under Desk Bracket
Under Desk Mounting Brackets For Kensington SD4700P Docking Station And Its Power Supply. 2 Of Each Part Needs Printing. Needs 8 4x20mm General Purpose Screws.
P
Printables
Kensington Orbit scroll ring rubber replacement
r1 = 47.6 / 2 r2 = 51.2 / 2 r3 = 58.6 / 2 h = 7.5 thickness = 1
P
Printables
London, South Kensington, United Kingdom - 3D Miniature
3D printable topographic miniature of London, South Kensington - 🇬🇧 United Kingdom Capture the beauty of London, South Kensington 's city landscape with this topographic miniature! This 3D model represents the geographic area around the…
P
Printables
Kensington power button case
I designed a custom power button case for the Minisforum MS-S1 Max to improve usability in a compact 10-inch server rack environment. The project focused on creating a cleaner and more accessible way to control the system without needing…