1 / 2
Kensington Smart Fit monitor plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement plate for Kensington Smart Fit monitor stands
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement plate for Kensington Smart Fit monitor stands.
I lost the monitor plate for this monitor stand :( so I designed a simple plate that can be used to mount my monitor.
It is compatible with vesa75 and vesa100 monitors. For vesa75 only 2 mounting holes are available, due to the mounting holes for the arm that are next to the bottom vesa75 holes.
Printing instructions/tips:
- Print vertical on either the left or right side have no layer stress after mounting
- Add one or more vertical shells to improve part strength (i have printed mine with 3 shells for a 24" monitor)
- Use a brim and/or supports to add stability during printing
- I prefer *Cubic or Gyroid infill types because it randomizes the mounting points to the shell
- I printed the plate in PLA and this should be plenty for older/smaller monitors. Use your own judgement for your use case.
Required mounting hardware:
- Kensington Smart Fit desk stand with a monitor arm
- 2x M4 nuts and M4*8 bolt
- 2-4 M4 bolts for mounting the plate to your monitor
Mounting procedure:
- Insert the M4 nuts in the plate
- Mount the plate to the back of the monitor
- Mount the monitor on the monitor arm and secure the monitor with M4 bolts