1 / 2
Kensington Smart Fit monitor plate — image 1
1 / 2

Kensington Smart Fit monitor plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A replacement plate for Kensington Smart Fit monitor stands

Rating
0 / 5
Likes
1
Downloads
25
Makes
0
Views
234
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a replacement plate for Kensington Smart Fit monitor stands.

I lost the monitor plate for this monitor stand :( so I designed a simple plate that can be used to mount my monitor.

It is compatible with vesa75 and vesa100 monitors. For vesa75 only 2 mounting holes are available, due to the mounting holes for the arm that are next to the bottom vesa75 holes.

Printing instructions/tips:

  • Print vertical on either the left or right side have no layer stress after mounting
  • Add one or more vertical shells to improve part strength (i have printed mine with 3 shells for a 24" monitor)
  • Use a brim and/or supports to add stability during printing
  • I prefer *Cubic or Gyroid infill types because it randomizes the mounting points to the shell
  • I printed the plate in PLA and this should be plenty for older/smaller monitors. Use your own judgement for your use case.

Required mounting hardware:

  • Kensington Smart Fit desk stand with a monitor arm
  • 2x M4 nuts and M4*8 bolt
  • 2-4 M4 bolts for mounting the plate to your monitor

Mounting procedure:

  • Insert the M4 nuts in the plate
  • Mount the plate to the back of the monitor
  • Mount the monitor on the monitor arm and secure the monitor with M4 bolts

Tags