1 / 7
Kensington Slim Type Keyboard foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a keyboard foot modelled for the Kensington Slim Type Keyboard.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a keyboard foot modelled for the Kensington Slim Type Keyboard. I had played with the original a bit to much so it broke off. Because of this I remodelled a new one for the keyboard.
The one that is shown in the pictures was printed with PLA. As shown in the picture I had the foot float around 1 cm above the print bed and at an angle of 305 degrees. The reason for the was to make it a bit stronger when it is in use.
I included the 3mf file that I used on the BambuLab.