Kensington power button case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model that allows to add a power button to any mini pc when mounted in revers in a 10" rack.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed a custom power button case for the Minisforum MS-S1 Max to improve usability in a compact 10-inch server rack environment. The project focused on creating a cleaner and more accessible way to control the system without needing direct access to the front panel of the device once mounted inside the rack.
I used a button with integrated LED so I can see whether the device is tunred on. The button wires need to be connected to the internal ATX header.
I printed my first attempt in galaxy PLA with 4 external perimeters. The print came out with 1 perimeter shell and was large enough to route 5 wires through it. It's strong enough to hold the whole button once inserted into the slot. I have added a threaded hole in the last version as the button also has M19 thread, which seems to be rather non-standard (at least no direct option in Freecad)
Link to the button with LED below. I ordered the 19mm one