Rectangular Trash Can Parametric Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric for plastic trashcans.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Description
This is a parametric lid for trash cans whose opening resembles a rectangle.
I use it as a lid to my bio-degradable waste to prevent plastic from accidentally falling in there from nearby plastic recycling bin.
Designing / Printing
You will need to fill the following parameters to make it fit your trash can:
I measured the lid_radius with these fillet swatches
https://www.printables.com/model/1451024-large-radiusfillet-gaugeswatch
I did it by putting the round end of a fillet swatch to the inner corner of my trash can like below
Tips:
You can print either a solid version (see the white lid in the pictures), or a porous one.
A porous lid will act as a barrier for e.g. material falling into the bin, but it will let moisture evaporate. This will let bio-waste last longer before mold grows.
To make a porous lid (see the black lid in the pictures), I set perimeters to 12, and top and bottom layers to 0. I printed out of PLA, 20 % honeycomb infill, 0,25mm speed profile on MK4S 0.4 mm HF nozzle.